Introduction: The Forgotten Password Dilemma
Connect your PC to the HMI’s COM port (usually COM1 – RS-232). Use a 2-3-5 pin null modem cable. Do not use Ethernet; these tools rely on serial communication. Delta Hmi Password Unlock Software
A: No. A standard firmware update preserves the user project and its password. A full firmware reflash with a bootloader patch can remove it, but again, that voids the warranty. Introduction: The Forgotten Password Dilemma Connect your PC
Power on the HMI. During boot, tap the top-left and top-right corners of the screen (or press and hold the "System" button if available) to enter the HMI’s System Setting menu. Navigate to "Transmission Settings" and set the COM port to the correct baud rate (usually 115200). Power on the HMI
A: Yes, using hardware programmers (like a TL866) to read the raw flash memory off the HMI’s PCB. This is extremely advanced, requires soldering, and costs more than a new HMI. Not recommended.