Since 1 unit = 0.001 mm: 5.000 mm / 0.001 mm per unit = 5000 units
Introduction In the world of CNC machining, precision is everything. A misalignment of just 0.001 inches can scrap a part costing thousands of dollars. Among the hundreds of system parameters that control a Fanuc CNC controller, Parameter 1860 often stands out as both a powerful tool and a potential hazard. fanuc parameter 1860 full
| Method | When to Use | Risk Level | | :--- | :--- | :--- | | | After replacing a limit switch or deceleration dog. | Medium | | Reference Position Shift (1860) | After replacing absolute encoder or battery. | High | | Work Shift (G54-G59) | Daily part setup. No permanent machine change. | Low | | External Offset | Temporary tool length changes. | Low | Since 1 unit = 0
Do not use Parameter 1860 to compensate for a worn ballscrew or loose coupling. Fix the mechanical problem first. Case Study: Correcting a Lost Zero After Battery Failure Situation: A Fanuc Robodrill (16i control) lost absolute encoder batteries over the weekend. After replacing batteries, the Z-axis zero was off by -12.345 mm (the tool changer finger crashed into the spindle). | Method | When to Use | Risk
| Parameter | Name | Purpose | | :--- | :--- | :--- | | | Grid Shift (Reference Position) | Shifts the grid point for all reference returns. Used for mechanical dog adjustment. | | 1851 | Grid Shift Fine | Fine adjustment (usually in 1/1000 mm or 1/100000 inch increments). | | 1860 | Reference Position Shift | Shifts the position the machine considers "Zero" after the reference return is complete. Often used with Absolute Pusle Coders. |
If you have searched for , you are likely trying to understand its purpose, how to set it correctly, or perhaps troubleshooting a machine that has suddenly lost its zero position. This article provides a complete, deep-dive explanation of Parameter 1860 – what it is, how it works, how to calculate the "full" value, and the critical safety steps you must take before editing it. What is Fanuc Parameter 1860? Fanuc Parameter 1860 is defined as the Reference Position Shift Value on the Z-axis (or the axis to which it is assigned). In many standard Fanuc configurations (especially on lathes and machining centers with absolute encoders), Parameter 1860 holds the distance (in detection units) that the machine moves to find its Grid Point during a reference return operation.
When you adjust Parameter 1860, you are not moving the physical limit dog. You are electronically shifting where the control the grid point is.