Jdy40 Arduino Example Best ✧

// Best practice: Send structured, short packets // Never send Strings larger than the buffer (max 64 bytes per packet) jdy40.print("TEMP:"); jdy40.print(23.5); jdy40.print(";BAT:"); jdy40.println(4.12);

Serial.println("JDY-40 Master/Slave Ready"); jdy40 arduino example best

The example above is production-ready. Just change pin definitions, power with clean 3.3V, and you will have a wireless link in under 60 seconds. Have you pushed the JDY-40 to 200 meters? Found a reliable antenna mod? Share your "best" experience in the comments below. // Best practice: Send structured, short packets //

| Command | Function | Best Setting | | :--- | :--- | :--- | | AT+RFADDR | RF Channel (0-255) | AT+RFADDR=115 (Pick a quiet channel) | | AT+RFNETID | Network ID (0-65535) | AT+RFNETID=5678 (Avoid default 0) | | AT+BAUD | UART baud rate | AT+BAUD=9600 (Most stable) | | AT+RFMD | RF Data rate | AT+RFMD=250 (250kbps = longest range) | | AT+TRPMAX | Transmit power | AT+TRPMAX=1 (Max power) | | AT+SLEEP | Power management | AT+SLEEP=0 (Disable sleep for continuous use) | Found a reliable antenna mod