A: It may work with generic CH340 or CP2102 chips if you manually change the VID/PID in the driver INF file, but this is not recommended and voids support.
# Remove conflicting generic module sudo modprobe -r cdc_acm wget https://github.com/jxmcu/drivers/releases/download/v3.2.1/jxmcu_linux_v3.2.1.tar.gz tar -xzf jxmcu_linux_v3.2.1.tar.gz cd jxmcu_driver Run installation script sudo ./install.sh Reload udev rules for device permissions sudo udevadm control --reload-rules sudo udevadm trigger Plug in your JXMCU device, then check dmesg | tail -20 ls -l /dev/jxmcu* jxmcu driver
After installing the driver, try flashing a simple LED blink program using the JX Flash Utility. Then, experiment with the latency tweaks to see real-time performance gains in your serial data acquisition or motor control applications. Happy coding! Last updated: March 2025. For the latest version of the JXMCU driver, visit www.jxmcu.com/drivers (official domain). A: It may work with generic CH340 or