Nalco 73385 Msds -
| Exposure Route | Immediate Action | |----------------|------------------| | | Remove to fresh air. If breathing is difficult, administer oxygen. If stopped, give artificial respiration. Seek medical attention immediately. | | Skin Contact | Remove contaminated clothing (shoes, belts, gloves). Wash with plenty of soap and water for at least 20 minutes. Do not use neutralizers; they can generate heat. Get medical help for any redness or blistering. | | Eye Contact | Hold eyelids open and rinse gently with water for at least 30 minutes . Remove contact lenses immediately. Do not attempt to neutralize. Immediate ophthalmological evaluation is required. | | Ingestion | Do not induce vomiting (risk of aspiration & further chemical burns to mouth/throat). Rinse mouth with water. Drink 1–2 glasses of water to dilute. Seek emergency medical care immediately. |
– diluting to lower pH does not remove molybdenum from the waste stream. nalco 73385 msds
Contact a licensed hazardous waste transporter. Nalco 73385 may qualify as RCRA hazardous waste code D002 (Corrosive - pH <2 or >12.5) . Some states also list molybdenum as a toxic metal. Seek medical attention immediately
Prevent entry into drains, ditches, or surface water. Molybdate is moderately toxic to fish (LC50 50–200 mg/L for some species). Do not use neutralizers; they can generate heat
Introduction In the world of industrial water treatment, few chemicals are as specialized—and as potentially hazardous—as concentrated corrosion inhibitors. Nalco 73385 is one such product: a high-performance molybdate-based corrosion inhibitor used primarily in closed cooling water systems, chilled water loops, and engine jacket water systems. While the product is essential for preventing costly metal degradation, its chemical potency demands rigorous safety protocols.
Staying safe means staying informed. Keep the MSDS accessible, understood, and respected. Disclaimer: This article is provided for informational purposes only and does not substitute for the official SDS issued by the manufacturer. Always follow the specific instructions on the SDS for the exact product lot and date of manufacture.
