| Road / Area Type | Average Maintained Illuminance (Lux) | Uniformity (Uo) | Glare Rating (GR) | |----------------|--------------------------------------|----------------|-------------------| | Arterial Roads | 20 – 30 lx | ≥ 0.4 | ≤ 25 | | Collector Roads | 15 – 20 lx | ≥ 0.35 | ≤ 25 | | Local Streets | 10 – 15 lx | ≥ 0.3 | ≤ 28 | | Pedestrian Zones | 5 – 15 lx | ≥ 0.25 | N/A | | High-Risk Intersections | 40 – 50 lx | ≥ 0.5 | ≤ 25 |
| Aspect | PR 402 (Abu Dhabi) | CIE 115 (Europe) | IESNA RP-8 (USA) | |--------|--------------------|------------------|------------------| | Basis | Initial lux values | Maintained lux | Maintained lux | | Glare limit | Strict GR ≤25 | GR ≤30 typical | Varies by class | | CCT restriction | Yes (<4000K) | No strict limit | No strict limit | | Light trespass | Very strict (≤2 lux residential) | Moderate | Moderate | | Dark sky focus | High (LZ0 zones) | Medium | Low/Medium | pr 402- abu dhabi lighting manual
| Violation | Consequence | Solution | |-----------|-------------|----------| | Using 5000K LEDs | Immediate rejection | Only 3000K or 4000K max, with justification. | | Insufficient uniformity (Uo < 0.35) | Safety hazard, non-compliance | Increase pole spacing or add secondary luminaires. | | Up-lighting on villa façades | Light trespass, neighbor complaints | Use shielded wall-washers or downward grazing fixtures. | | Ignoring controls (no dimming) | Fails Estidama review | Specify 0–10V dimmable drivers and programmable schedule. | | Using non-IP65 fixtures | Dust ingress, early failure | Require IP66 for horizontal or exposed luminaires. | How does PR 402 compare to other codes? | Road / Area Type | Average Maintained